Residential

Standard white replacement housing for Reverse Osmosis Drinking Systems. Holds a 2-1/2” x 10” filter cartridge. 

The Inline GAC with Scale Inhibitor effectively reduces Chlorine, Taste & Odor, as well as Scale from your drinking water. Features 1/4" FPT connections.

6” K2386
10” 65010004

ASN 4700 Series  Two tank system for high hardness (> 75gpg) water. First tank acts as workhorse significantly reducing hardness while second tank acts as polisher. Prevents hardness leakage common in single tank systems. The second tank acts as a ‘polisher’ and reduces slippage as the overpowering high hardness condition has been significantly reduced. This also increases the contact time with the softener resin therefore more consistent. Salt efficiency is even more important on high hardness situations.

Upper Distributor (also known as Upper Basket) for riser tube to valve.

1” - 50010001

Available in Celluose or Polyester

Pleated Filter Cartridges:
1 Micron:
5 Micron:
20 Micron:
40 Micron:
2.5” x 10”
2.5” x 20”
4.5” x 10”
4.5” x 20”
 

Replacement Membrane Housing for standard Reverse Osmosis Drinking Systems, it uses 1/8” FPT fittings.

The Inline  GAC Filter is a post filter. Inline GAC Filter uses granular activated carbon. The carbon filter absorbs impurities and removes chlorine taste and odor from your water. Filter fits 1/4" female pipe thread. Installation is quick and easy with the water directional flow arrow printed directly on the filter cartridge. It is recommended to flush the water line after installation to remove loose carbon particles. Generally, this filter is replaced every 12 months to assure quality of water.

Electronic Metering Pumps
Operating Benefits
• Reliable metering performance. Guided check valves with
proven seat and ball designs make PULSAtron the most
reliable metering pumps in the world.
• Rated “hot” for continuous duty. PULSAtron pumps will
continue to meet their specifications for pressure and
capacity during extended use.
• Leak-free, wet end without seals. Our diaphragms are of
superior construction – PTFE-faced, bonded to a
composite of Hypalon and fabric layers and reinforced