ASN 9800 Light Commercial Reverse Osmosis
ASN 9800 Series Reverse Osmosis System is an affordable solution for applications up to 800 gallons per day and removes up to 98% of total dissolved solids in raw feed water.
Commercial
Reverse Osmosis Booster Pump
PAB8800 Series High Flow Booster Pump
Key Operational Benefits:
• Boosts pressure 40 to 120 psi (adjustable)
• Used with membranes 50 to 120 GDP
• 15,000+ operating hours (estimated)
• Quiet – less than 52 DBA
• Can run dry without damage
Features:
• Toughest, most durable pump on the market
• Adjustable max. outlet psi (regardless of feed pressure)
• Expels trapped air (no more air locks)
• Can be mounted with pump head up or horizontal
KemFlow Booster Pump
KemFlo MD1050 Booster Pump
Description: 110/230 VAC, 75 GPD Booster pump 1.0 L.min, suitable for applications with 24VDC transformer
Specifications: KemFlo MD Series Booster Pump with 3/8” FNPT, made from NSF grade material high power flow rate and quality. Meets ROHS standard.
Flow Switch
For use on liquid lines using water, ethylene glycol solutions, or other liquids not corrosive to the brass or phosphor bronze parts. The SPDT contact switch is activated by a low flow rate; however, it has a large flow capacity with a minimum pressure drop.(Low Flow Rate – SPDT)
Kopkit® Maintenance Kit
Available for every model, the KOPkit provides an economically priced package of parts required for routine maintenance. The kit typically contains new valve cartridges with o-rings, head, diaphragm, secondary o-ring seal, head screws and washers.
Ban T®
Ban T® (formerly called Pro-Citric Acid) is specifically formulated to effectively lower pH and remove iron and other contaminants from fouled water softeners. Ban T should be used as preventative maintenance on all water softeners in areas with moderate iron content to clean, restore and maintain the life of the softener. Ban T is an environmentally-friendly cleaning agent that removes hard water deposits and moderate iron staining from household fixtures.
Chlor Pel®
Chlor Pel® is an EPA approved, blended pellet, designed to disinfect and destroy certain disease-causing organisms found in water. It is formulated for use in new wells, wells that have had service work, cisterns, storage tanks and water lines. Chlor Pel® is compatible with most brands of dry pellet chlorinators to prevent or treat iron algae, harmful bacteria, disease-causing pathogens, hydrogen sulfide and other odor-causing agents.
Adjustable Metering Pump
Stenner’s adjustable metering pump is built with three detachable components: the motor, feed rate control and pump head. Outputs are dependent upon three factors: the rpm of the motor gears, the percentage setting on the feed rate control and the size of the peristaltic pump tube. All Stenner metering pumps have a 3-point roller design in the pump head, which acts as a check valve to prevent back flow, siphoning, overdosing and loss of prime. The motor shaft rotates at a fixed rpm which drives the adjustable feed rate control to intermittently engage the roller assembly within the pump head.
